ISCORMA-1 Abstracts

Use the following links to navigate the past conference abstracts

ISCORMA-1 Abstracts | ISCORMA-2 Abstracts

ISCORMA-3 Abstracts | ISCORMA-4 Abstracts

Viewing the following documents requires Adobe® Reader® from Adobe Systems Incorporated.

Keynote Presentations

Number:	Title:	Author/Authors
001	Creativity, Connections, and Chance in Rotordynamic Research	Nelson, H. D.
002	Summary of BRDRC's New Research for Year 2001	Bently, D. E.
003	The Fluid Force Model in Rotating Machine Clearances Identified by Modal Testing and Model Applications: An Adequate Interpretation of the Fluid-Induced Instabilities	Muszynska, A.

Monitoring and diagnostics (practice, field case histories) with special attention to the cases of instability and practical means to eliminate them.

Number:	Title:	Author/Authors
1003	Design Optimization of High Speed Laboratory Centrifuges Using An Evolutionary Strategy	Strackeljan, J. Feng, X. Behr, D.
1004	Detection of a Rotor Crack by a Periodic Excitation	Ishida, Y. Inoue, T.
1005	Detection of Feedback Related Faults in Magnetic Bearing/Rotor Systems Using Synchronous Control Techniques	Sahinkaya, M.N. Cole, M.O.T. Keogh, P.S. Burrows, C.R.
1006	Sensitive and Noise-immune Vibration Discriminants for Instability Phenomena Detection Caused by Incipient Machinery Deterioration	Sokolova, A. Balitsky, F.
1007	Why We Need to Install Exciters in Rotating Machines?	Lee, C.-W.
1008	Diagnostic Approaches for Gears and Bearings	Breneur, C. Mahfoudh, J. Stofleth, K. Play, D.
1009	Vibroacoustical Diagnostics of the Movable Reflector-Modulator of the IBR-2 Pulsed Research Reactor	Evropin, S. V. Sizarev, V. D. Yakushina, L. V. Ananiev, V. D. Edunov, L. V.
1010	Expert System Source Identification of Excessive Vibration	Kirk, R. G. Guo, Z.
1013	Condition Monitoring and Diagnosis of Rotating Machinery by Gram-Charlier Expansion of Vibration Signal	Toyota, T. Niho, T.
1014	Vibration and Stability of 3000 HP Titanium Construction Chemical Process Blower	Gutzwiller, L. Corbo, M. A.
1016	Application Of In-Operation Modal Analysis In Diagnostics Of Machinery	Uhl, T. Lisowski, W. Barszcz, T.
1017	Rotordynamic Influence on Rolling Element Bearing	Queitzsch, G. K., Jr. Fleming, D. P.

Stability of rotating equipment (experimental and analytical methods of stability study on rotating machinery and dynamic stiffness measurement).

Number:	Title:	Author/Authors
2002	Surge Characteristics of Centrifugal Compressors with IGV's	Rodgers, C.
2003	Dynamic Analysis of High Speed Spindle System with Diametrical and Thrust Magnetic Bearings	Shiau, T. N. Chang, C. M. Hsu, K. S.
2004	The Effect of Swirl Braked Grooved Seals on the Stability and the Unbalance Response of a Flexible Rotor	Ishimaru, H. Iwatsubo, T.
2005	Dynamic Response of a Rotor Supported on a Floating Ring Bearing	Naranjo, J. Holt, C. San Andrés, L.
2006	A Hybrid Radial Bearing with Improved Rotordynamic Stability	San Andrés, L.
2007	Effect of Interference Fits on Threshold Speeds of Rotordynamic Instability	Vance, J. M. Ying, D.
2009	Some Types, Classification and Definitions of Instability in Rotating Machinery	Oravský, V.
2010	Stability Analysis of Isotropic Rotor-Bearing Systems With Internal Damping Using Finite Elements	Forrai, L.
2012	Effects of Seal Geometry on Rotordynamic Fluid Forces	Moimoto, G. Nishida, H. Yoshida, Y. Tsujimoto, Y. Morii, S. Kawashima, Y.
2013	Design verification and Trouble shooting by Vibration exciting	Kanki, H.
2014	Consideration of Whirl Frequency Ratio and Effective Damping Coefficient of Seal	Iwatsubo, T. Ishimaru, H.
2015	Air-Hammer Instability of Externally Pressurized Compressible- Fluid Bearings	Jacob, J. Yu, J. J. Bently, D. E. Goldman, P.

Bearing/seal technology.

Number:	Title:	Author/Authors
3001	Design Optimization of Fixed Pad Journal Bearing for Rotor System Using a Genetic Algorithm Approach	Saruhan, H. Rouch, K. E. Roso, C. A.
3002	Computational Modelling of Dynamic Behaviour and Stability of Journal Bearings Using the Bézier Body	Eduard, M. František, P.
3004	Analysis of Short Magnetohydrodynamic Journal Bearings	Wauer, J. Schweizer, B.
3005	Hydrostatic Pivoted Pad Bearing for Oil-Free Turbomachinery	Greenhill, L. M. Lease, V. J.
3006	Analysis of Externally Pressurized Fluid-Film Bearings for High-Speed Rotating Machinery	Guo, Z. Kirk, R. G.
3008	An Effect of Pad Support Position on the Dynamic Characteristics of Tilting 4- Pad Journal Bearing	Strzelecki, S.
3009	The Effect of Bearing Clearances On Its Dynamic Stiffness	Racic, Z.
3010	Development of a Test Rig for the Measurement of Squeeze-Film Damper Force Coefficients	Inayat-Hussain, J. I. Kanki, H. Senno, Y.
3011	Online Lubrication Performance Monitoring of Fluid Film Bearing by Shaft Vibration Measurement	Toyota, T. Niho, T. Chiba, T.
3012	Numerical Analysis of the Journal Motion in the Hydrodynamic Bearing of the Internal Combustion Engine	Fridman, V. M. Musolff, C. F. Piraner, I. L.
3013	lnvestigation of New Design of 3-Lobe Journal Bearing	Karpiuk, R. Radulski, W. Olszewski, O. Ostrowski, P. Malec, A.
3014	Active Controlled Fluid Film Based on Wave Bearing Technology	Dimofte, F. Hendricks, R. C.
3015	Experimental Study of the Rotor Rig with a Bubble Inserted into the Bearing Clearance	Bently, D. E. Petchenev, A. Malakhova, O.
3016	Stability Insights from Hybrid-Bearing Research at the Texas A&M University Turbomachinery Laboratory	Childs, D. W.
3017	Short Journal Bearings With Misaligned Axes	Gomez-Mancilla, J. Nosov, V. R.
3018	Externally Pressurized Bearings Allow Rotor Dynamic Optimization	Bently, D. E. Eldridge, T. Jensen, J.

Rotating machinery modeling and its application to design and diagnostics.

Number:	Title:	Author/Authors
4001	Rotordynamics and DDM Design Sensitivity Analysis of an APU Gas Turbine having a Spline Shaft Connection	Lee, A. S. Ha, J. W.
4002	Cracked Beam Section Model Applied to Turbine Rotors	Vare, C. Andrieux, S.
4003	Analysis of the Dynamic Characteristics of Lab-Centrifuges and Its Application	Yun, Y. Zheng, W.
4004	Identification of External Disturbances in Rotating Machinery with Magnetic Bearings	Gosiewski, Z.
4007	Numerically calculated rotor dynamic coefficients of a pump rotor side space	Staubli, T. Bissig, M.
4008	Decoupling Control of Fault-Tolerant Magnetic Bearings	Na, U. J. Palazzolo, A. B. Kascak, A. F.
4009	Dynamic Analysis of Rotor Systems with Angular Contact Ball Bearings Subject to Axial and Radial loads	Hong, S.-W. Shin, Y. C.
4010	Effect of Lubrication System on Dynamic Analysis of Scroll Compressors	Lee, W.-S. Chieh, J.-J. Chen, W.-L. Chen, S.-L.
4011	An Analysis of Rotor System Dynamics Using Properties of Separate Rotors, Obtained by FEM Softwares	Ryjik, B.
4012	Dynamic Behavior of High-speed Rotor Supported by Fluid Film Journal Bearings	Temis, Y. M. Temis, M. Y.
4013	A Composite Air Spindle-Rotor System	Lee, D. G. Chang, S. H.
4014	Dynamics of Rotating Flexible Blade-Disc-Shaft Assemblies Application to a Turbomolecular Pump Rotor	Jacquet-Richardet, G. Chatelet, E. Gaboyer, C. Dauvillier, O.

General rotor dynamics.

Number:	Title:	Author/Authors
5001	Fact and Fallacy in Linear Rotordynamics Analysis	Caldwell, A.
5004	Determination of Contact Forces During Rubbing Considering Blade Dynamics	Ahrens, J. Ulbrich, H.
5006	Vibration Characteristics of Rotors with Massive Overhangs	Ryzhik, B.
5007	On Transient Excitation of a Damped Two-Bladed Rotor	Bratt, J. F.
5008	Thermo-Mechanical Behavior of Rotor with Rubbing	Sawicki, J. T. Montilla-Bravo, A. Gosiewski, Z.
5009	Life begins at 70	Liu, K. M.
5011	Experimental Study of an Overhung Rotor System with Gyroscopic Effects, and the System's Response to Partial Rub	Dayton, K. Goldman, P. Franklin, W. Bently, D. E.

Abstracts | Awards | Photos | Summary